4X1 Enhanced 1.3b Certified HDMI Switch with Remote
4X1 Enhanced 1.3b Certified HDMI Switch with built-in Equalizer and Remote
The HDX-401E is our first HDMI 1.3b certified switch. This switch supports higher bandwidth HDMI 1.3 signals. It is fully compatible with all prior versions of HDMI and will support all the new features of 1.3 including Deep Color (high color bit depth) and enhanced multi-channel digital audio formates like Dolby True-HD and DTS-HD Master Audio. The built-in equalizer compensates for signal degredation and provides maximum range and signal integrity. The included IR remote allows you to switch the input from the comfort of your viewing position.
The switch features:
Support for up to 4 HDMI or HDCP compliant DVI video source devices
Support for HD resolutions up to 1080p
Support for Multi-channel PCM digital audio formats
Compatible with new 120Hz and higher picture features
Bright, easy to read LED front panel display
Sleek, low profile design
Built-in signal equalizer for maximum effective range and signal integrity
IR remote control
Front panel toggle button
Plug-and-play. No software installation. Super-quick set-up
Low cost solution for home theater integration
Supports DDWG standard for HDMI compliant monitors
HDMI Specification: 1.3b
HDMI source Input port : 4
HDMI source Output port : 1
Source port connector : HDMI
Display device port : HDMI
HDCP Compliant : Yes
Display device selection : push button or remote
Device port LED : 4
Single link range : 1920 x 1200
Bandwidth: 6.75 gbps (225mhz)
Deep color support: up to 36 bit.
Vertical frequency range : 60Hz ***Switch is compatible with televisions with 120hz picture features.***
Certification : FCC & CE
Enclosure : Metal
Dimensions : 7" x 3 3/8" x 1"
(*)This switch does not include any cables. You'll need to buy cables separately.
NOTE: 24AWG or thicker (lower AWG number) cables are HIGHLY RECOMMENDED for best performance. Some devices will require thicker gauge, category 2 cables to work with this switch. For runs up to 15ft, use 24AWG. For runs of 20ft or more, use 22AWG (which is thicker than 24AWG.) Also, some source devices will not work with HDMI cables shorter than 4ft. If you require short HDMI cables, we recommend using at least 4ft 24AWG cables with this switch.